You guys are the best
HyperPole Grip Replacements
$32.60
Unit price
/
Unavailable
Couldn't load pickup availability
The Hyper Grip ll features felt Rubber with a Pinch clamp on the top and bottom to fasten the grip to the pole securely. A Mass air flow inlet for rapid air release from the Hyper Pole with a replaceable ergonomic end cap. End caps are special orders.
Shipping Policy: Expect 24-72 hours from the time the order is placed for processing, packaging the order before the shipping carrier receives the order. This is not included in the estimated shipping time from the shipping carrier. For inquiries about shipping please reach out to us using our email!
Features
-
Unique end cap
-
Mass air flow inlet for rapid air release
-
Two Pinch clamp
-
All Stainless-Steel hardware
Materials
-
Felt Rubber relatively resistant to abrasion and moisture absorption, long-lasting, resistant to wear and chemicals.
-
Stainless steel 304 has excellent corrosion resistance in a wide variety of environments and when in contact with different corrosive media
- Corrosion resistance resists most oxidizing acids and Salts
Benefits
-
Reduces user fatigue while increasing productivity
-
Easier to install
-
Corrosion resistance resists most oxidizing acids and Salts
- All Stainless-Steel hardware
Installation Instructions
Installation Guide (Video on our Instagram @ultimatepooltools)
Supplies Required: 2.5 Millimeter Allen Wrench, windex, Paper Towel, Rubber mallet or hammer, smooth ball hammer.
Supplies Provided: 1 Hyper Grip, 1 End Cap, 2 2.5 mm screws.
If you have old blue hyper grip:
- Remove the Allen screw and nut, next take a sharp knife, and score/ cut the grip from the Allen screw pinch clamp to the end of the grip and end cap. Then at the grip pinch clamp Use a pen or socket extension to spread apart the grip clamp and twist to release the bond tape. Then slide the grip off one it has released from the tube.
- Clean the residue from the previous grip bond tape adhesive. Use Windex and a paper towel.
- Get your scotch tape, and hyper grip. Use the hyper grip to measure where to place your scotch tape. Place your tape on the pole and wrap it around 360 degrees leaving some room to “dog ear” the tape for easy removal. (Please see the Instagram TV installation video for this part).
- You will need the 1 Piece of bond tape that was provided. You are going to apply the Bond Tape to the pole approximately 1/8th of an inch away from the scotch tape between the scotch tape and the end of the pole.
- Dampen the bond tape with water or Windex to activate and lube the tube to help the grip slide on. Lightly mist do not over dampen the bond tape.
- Take the grip and push the pen down between the grip’s pinch clamp. Make sure the pen is not blocking the opening for the grip end where the pole inserts. This will open the grips pinch clamp, so it slides easily over the pole end.
- Next install the grip by hand, slide it on up to the beginning of the bond tape leave the pen in place. Now you are ready to hammer the grip on the rest of the way, MAKE SURE you leave the pen in place in the pinch clamp. You may need to hold it in place using your thumb while you hammer the grip on. MAKE SURE you Use a Rubber mallet to tap the grip (don’t hit it to hard light taps until it’s on all the way) with the pen onto the pole up to the scotch tape.
- Remove the scotch tape and pen, and any bond tape that is left over.
- Get your Nut and screw (notice the nut has a flat side and a beveled side. The beveled side goes facing down into the plastic). Place the nut Beveled side down into the square side of the pinch clamp.
- Leave the Grip with the nut side facing up and install the Allen screw from underneath.
- Tighten the screw into the nut from underneath until the screw is securely fastened. Once the screw has tightened you can turn the grip up and tighten more. PLEASE use our installation guide video on our Instagram to help you.
- The end cap and retainer clip come installed already.
If you have all black Hyper grip
- Remove the two 2.5 allen screws from grip.
- Take a Ruber hammer and tap the grip off OR grab the grip, twist and pull off.
- clean the carbon tube with windex and towel of some kind.
- take the new grip and tap it on the tube with rubber hammer until flush.
- install the two 2.5 allen screws in the two metal pinch clamps don't over tighten.
- insert the plug in the end of tube, if plug is loose, remove plug and wrap 1 to 2+ times around of electrical tape re-install.
Patent Pending
-
3K Carbon Fiber Weave Pole
-
Perpendicular Lever Compression Speed Clamps
-
Stainless Steel Steel Tool End Fitting
-
Hyper Drain/ Fill System
-
Mass Air Pinch Clamp Grip
Warranty
Our Speed clamp sets, and Hyper Grips are considered consumable items and require replacement subject to wear. The warranty is 60 days manufacture defect. Hyper Grips can be damaged from slapping the most inner section closed migrating the grip off the pole and then it breaks this is not covered under warranty.
To make a warranty claim please send an email with attached photos of the issues or damage along with a receipt or proof of purchase. Please send the email to Info@ultimatepooltools.com 
Shipping Policy
We will process and package your order with in 24- 48 hours and drop it off to the shipping carrier you have selected to ship your products. Once the package is in the hands of the shipping carrier you have selected it is no longer our responsibility. if you have any issues with your shipping such as delays or non-delivery you will need to contact eh shipping carrier and please also notify us.
International Shipping Policy The receiver is responsible for any import or duty fees when they import the products they purchased from out of the country.
ATTENTION: SHIPPING OVERCHARGE MAY APPLY on smaller items. We will refund the shipping overcharges when we process your order!
Customer Reviews
Overall rating: 4.9 / 5 from 485 reviews.
I was going back and forth about buying the pole due to the price but after buying it and using it, it is very well worth it. I’ve been using it for 2 weeks now and it’s been great! Definitely recommend it and will be buying another one soon!
Been a great pole , going to buy 2 more!!
Es lo máximo
I wasn’t sure about the price but now that I’ve used it and experienced how high quality it is, I think it’s very reasonably priced. It’s the best pole I’ve ever used and I’ll never go back to an aluminum one.
HyperPole / Carbon Only Swimming Pool pole
Store owner replied: thank you so much for your kind words and sharing your experience !
This is the best pole I've used! I previously worked with the Skimlite CL615 and absolutely prefer the Ultimate HyperPole. The Ultimate has better construction and a much better grip. I found that it was just easier to work with; I had much less fatigue at the end of the day. The clamps are faster, more secure, and easier to adjust. I use the Riptide and the Ultimate fits perfectly and makes it easy to steer. The HyperPole has a great balance to it, making it easy to brush the walls and throw the net. I definitely recommend the HyperPole!
I broke my first one. It was a 3 x 15. I think this one is way stronger and I love that it is smaller. I can actually throw it in the back of the truck if I want to and don’t have to worry about someone stealing it or flying out of the bed, but I was very surprised that the first one I got from y’all broke
HyperPole / Carbon Only Swimming Pool pole
Store owner replied: Hey, We truly appreciate you sharing your experience with the HyperPole / Carbon Only Swimming Pool pole. the 3x15 model you had that broke i hope you still have as they are 100 % rebuildable. Carbon fiber poles can break, its a misconception that they are invincible. the carbon fiber material itself regardless of who makes it or where it comes from has inertially poor tensile rating for leverage and impacts. thsi can lead to breakage. please reach out via email info@ultimatepooltools.com we can help get the 3x15 fixed and back in working order !
Thanks!!
Everything went well and really fast couldn’t ask for more great company. Great service.
So far I really like these poles. Time will tell. Bought them to replace primate poles that we keep breaking. I really like these protection cover that they have and they don’t flex like the primate pole does.
The best of the best!!!!
so far great, we'll see after a few months of doing over 100 pools a week
We are enjoying our product looking for more new goodies.
This new pole is amazing!!! The service from ultimate pool tools is really the best.
It’s a nice upgrade! Easy to use. Love the 3 tier extension. Love the orange. Protective shrink wrap has a few scuffs and scrapes fresh out of the box which is a little disappointing. But over all super happy with my purchase.
Fully extended, barely flexes. Joints are strong, could use a stopper inbetween the top extension and bottom, its a hand pincher ! Other than that, no other pole is worth 350$. Theyre simply too heavy. These feel like a 350$ pole.
Great pole, light and heavy duty. The metal tip makes it very tough.
The pool looks absolutely amazing. It's very light, the hyper drain technology makes much less resistance and drains quicker than my other poles. At the end of the day it is a little more relief on my back. I love this pole!
Ordered a replacement pole plug and it arrived quickly! Great products and service!!
Works great hardened fast and was easy to install
Unbelievable pool . Makes my day easier and more efficient. Also customer service is one above all.
Thanks got my Paul. Love it! can’t wait to use it out in the field in the spring. Right now we’ve got about a foot of snow on the ground in upstate New York. Thanks again!
Love it, dependable!!!!
Fast Delivery. Awesome pole! Can’t wait to use it
Perfect,thanks
Store owner replied: Thank you, Luis, I’m glad the clamp served its purpose! Thank you for doing business with us
I absolutely love this pool pole. I did mistake the guard for something else I knew I was wrong! If I had known the guards were there I would’ve bought one for my pink one too, to conserve the look! Nonetheless very happy with my poles!!
HyperFusion / Swimming Pool Pole / High Impact Resistant
Store owner replied: Thank you for your feedback! It looks like your pole has a clear protector installed to help prevent scratching and damage. This protector is a heat-shrink sleeve, and it will naturally wear out over time and need to be replaced. If you ever need a new one, just reach out—we’re always happy to help.
Nothing but the best! Especially when you need jsut a. few more feet to get those hard to reach spots!
Store owner replied: Thank you so much for your kind words and being a valued customer !
Long pool + long pole = Less need to walk around the pool to vac it! Working smarter, not harder! Wouldn't be possible without one of these commercial beasts!
The best pole we've ever used for commercial pools. Thank you!
Wow! Your hyperfusion pole is a superb product! It fits in my truck better and is easier to carry to the pool. The smooth action when extending or shortening the reach feels nice and with well made clamps that can be tightened up I feel secure when leaning into it. Less resistance when pushing through the water and pulling out of the water because of the well thought out design in a very comfortable handel that relieves air pressure, and the extra slotted holes at the bottom drain out water quickly. Once you try it you will instantly notice a difference and fall in love! Thank you all who put the effort into design and build. Because of all of you there is a better tool that makes our job more enjoyable! I really can't thank you enough for putting up the raffle prize and shipping it out to me. I have more pictures to send you. -Harrison from Maui
Love my 4x26 Hyperpole. Makes my day run a lot smoother on my Commercial accounts.
It slides easily, solidly built, and the blue looks nice. Feels built to last and high quality. Lightweight and comfortable while in use. Love it!!
Love it!! Built, like a tank! I don't have to worry about bending or breaking poles anymore 😎🤙
Ive always used skimlites. I spent a few months working with Ambiance pools in Tucson and they gave me this pole instead! They only use this pole! I fell in love with it!. It was so lite and the action was so smooth! built for reliability and speed!
Love the poles. Order 2 of them!!
Such a good pole
I need a pole that would fit inside the bed of my truck and they custom made a pool for me that fits perfectly. It needed to be 6‘7“ fully collapsed and they did it. I got it in the mail the next day. Service is amazing and the pole is really great too Bryan from Great American Pools
Best pole I have used hands down
Best pool pole on the market hands down. The lightweight carbon fiber, the sturdy latches, and the smooth metal opening. It's a good buddy for the pool man. I expect it to be by my side for many years to come.
Back to loving my ultimate pole! Thank you guys!
